ⓘ
$63.56 $66.90
$3.34 off RRP of $66.90
Product Overview
Bait Board lge 2 xRodHold
A range of quality, injection moulded, UV stabilised, high density polyethylene bait boards in various sizes with rail or rod holder mounting options. The legs are made from anodised aluminium. A measurement scale in both Centimetres and inches is moulded into each board and all boards include 2 x recessed tackle/bait holders and a large recessed draining tray. Small Bait Boards - Overall size : 515mm wide x 355mm deep. Cutting area : 500 x 275mm. The board features moulded measurement scales, 2 x recessed tackle/bait holders and large recessed draining tray with a 10mm hose barb below. Available with a single adjustable aluminium leg for rod holder mounting or with a rail mount to suit 25mm diameter rails. Large Bait Boards - Overall size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. Available with 2 x fore & aft ratchet adjustable aluminium legs for rod holder mounting or with 2 x rail mounts to suit 25mm diameter rails. Large Bait Board - With 2 x Rod Holders Overall size including rod holders : 925mm wide x 475mm deep Bait board outside size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. 2 x fore & aft adjustable aluminium legs for rod holder mounting and 2 x rod holders.
A range of quality, injection moulded, UV stabilised, high density polyethylene bait boards in various sizes with rail or rod holder mounting options. The legs are made from anodised aluminium. A measurement scale in both Centimetres and inches is moulded into each board and all boards include 2 x recessed tackle/bait holders and a large recessed draining tray. Small Bait Boards - Overall size : 515mm wide x 355mm deep. Cutting area : 500 x 275mm. The board features moulded measurement scales, 2 x recessed tackle/bait holders and large recessed draining tray with a 10mm hose barb below. Available with a single adjustable aluminium leg for rod holder mounting or with a rail mount to suit 25mm diameter rails. Large Bait Boards - Overall size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. Available with 2 x fore & aft ratchet adjustable aluminium legs for rod holder mounting or with 2 x rail mounts to suit 25mm diameter rails. Large Bait Board - With 2 x Rod Holders Overall size including rod holders : 925mm wide x 475mm deep Bait board outside size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. 2 x fore & aft adjustable aluminium legs for rod holder mounting and 2 x rod holders.
| SKU | RWB5488 |
| Brand | RWB |
Ratings & Reviews
Be The First To Review This Product!
Help other Marine Depot users shop smarter by writing reviews for products you have purchased.
RWB Bait Board lge 2 xRodHold
Shop all RWB
Part No: RWB5488
Have a question
Product Overview
Bait Board lge 2 xRodHold
A range of quality, injection moulded, UV stabilised, high density polyethylene bait boards in various sizes with rail or rod holder mounting options. The legs are made from anodised aluminium. A measurement scale in both Centimetres and inches is moulded into each board and all boards include 2 x recessed tackle/bait holders and a large recessed draining tray. Small Bait Boards - Overall size : 515mm wide x 355mm deep. Cutting area : 500 x 275mm. The board features moulded measurement scales, 2 x recessed tackle/bait holders and large recessed draining tray with a 10mm hose barb below. Available with a single adjustable aluminium leg for rod holder mounting or with a rail mount to suit 25mm diameter rails. Large Bait Boards - Overall size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. Available with 2 x fore & aft ratchet adjustable aluminium legs for rod holder mounting or with 2 x rail mounts to suit 25mm diameter rails. Large Bait Board - With 2 x Rod Holders Overall size including rod holders : 925mm wide x 475mm deep Bait board outside size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. 2 x fore & aft adjustable aluminium legs for rod holder mounting and 2 x rod holders.
A range of quality, injection moulded, UV stabilised, high density polyethylene bait boards in various sizes with rail or rod holder mounting options. The legs are made from anodised aluminium. A measurement scale in both Centimetres and inches is moulded into each board and all boards include 2 x recessed tackle/bait holders and a large recessed draining tray. Small Bait Boards - Overall size : 515mm wide x 355mm deep. Cutting area : 500 x 275mm. The board features moulded measurement scales, 2 x recessed tackle/bait holders and large recessed draining tray with a 10mm hose barb below. Available with a single adjustable aluminium leg for rod holder mounting or with a rail mount to suit 25mm diameter rails. Large Bait Boards - Overall size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. Available with 2 x fore & aft ratchet adjustable aluminium legs for rod holder mounting or with 2 x rail mounts to suit 25mm diameter rails. Large Bait Board - With 2 x Rod Holders Overall size including rod holders : 925mm wide x 475mm deep Bait board outside size : 720mm wide x 475mm deep. Cutting area : 705 x 370mm. Mounting width of the legs is adjustable by sliding the mounts along the rail underneath the bait board - minimum mounting width 225mm, maximum width 635mm. The board features moulded measurement scales, 2 x recessed tackle / bait holders and large recessed draining tray. 2 x fore & aft adjustable aluminium legs for rod holder mounting and 2 x rod holders.
| SKU | RWB5488 |
| Brand | RWB |
Ratings & Reviews
Be The First To Review This Product!
Help other Marine Depot users shop smarter by writing reviews for products you have purchased.
More from this category
$12.93 off RRP of $258.70
$14.02 off RRP of $187.00
$332.41 $349.90
$17.49 off RRP of $349.90
$2.90
$5.62 off RRP of $75.00
Stock Location
Stock is warehoused in Brisbane, Sydney, Melbourne and will be dispatched based on warehouse availability and delivery location.
Shipping & Returns
- FREE SHIPPING is on all orders over $499* and up to 25kg within Metro areas only including Melbourne, Sydney, Brisbane, Adelaide.
- Free Shipping excludes certain heavy and bulky items over $499.
- Remote areas might incur additional charges, in these cases we will contact you.
- Please note that heavy and bulky items ( some seats, large anchors, consoles, rope, chain etc ) have shipping limitations and can't be sent to any islands ( 2899 - Norfolk Island, 4875 - Thursday Island, 6798 - Christmas Island, 6799 - Cocos island ) or remote areas such as NT, WA, TAS, regional or far Nth QLD. In these cases we will contact you regarding the order and either cancel it or send to an alternative address if possible.
- *Note: Please note that certain heavy and bulky items over $499 might not be available for Free Shipping. In these cases we will contact you to confirm before the order is shipped out. Additional freight charges might apply. ie
- Drums and long lengths of chain
- Dangerous goods
- Large bales of rope
- Palletised anchors
- Large or palletised seats
- Leaning posts
- T-Tops
- Aerials and Outriggers
- Bulk PFD’S
- Rigid lifebuoys and holders
- Unfortunately we are unable to ship Large or Bulky items to PO Boxes.
- Unfortunately we are unable to offer pickups
- At the moment we are unable to ship any items Internationally
- Delivery times may vary, especially during peak periods. While we strive to have orders despatched within 2-5 working days, some items can take a little longer due to interstate warehouse locations and delivery times. If an item is needed for a specific date, please check with us first. To be on the safe side it is best to order at least 10 working days before an item is needed.
- Buyers living in remote areas such as farms, islands, mining camps, small towns, or out-of-towners, etc may need to collect from their nearest freight depot as we can't guarantee door to door delivery in each case.
- If an order can't be delivered by the courier due to an address issue and is returned to us, we will require an additional payment for reshipping the item(s)
- All deliveries are made during weekdays only, during normal business hours (9am to 5pm). Orders can't be delivered on weekends, public holidays or after business hours.
- We use Direct Freight Express, StarTrack Express, Toll, Couriers Please and Australia Post for shipping items, depending on your location and the item being shipped, at our discretion.
- NOTE: All Australian Courier charges allow for Only 1 Attempted Delivery per order. All orders will be shipped as ATL (Authority to Leave) at the premises. Please supply an address where someone can sign for the parcel.
- Depending on order time, most orders leave our warehouses within 2-5 working days of receiving the order. We do ask that you allow 7-10 working days for delivery, however in most cases orders are delivered within Metro Areas within 2-5 working days. Regional areas can take longer.
- If there is a stock availability issue on certain products in your order, you will be contacted and alerted to the status of your purchase. For more information on products and delivery, please contact us.
- All orders are traceable and are sent with either Direct Freight Express, Australia Post, Couriers Please, Startrack Express or Toll Express.
- *Note: Some products may take longer to despatch, as they are custom order in items and are warehoused interstate with our suppliers.
- Time frames for delivery may alter due to circumstances beyond our control, such as, but not limited to, supplier stock levels.
Enquire Now
Price
The RRP is the manufacturer's recommended retail price. We barely ever sell at RRP as we always aim to give our customers everyday low prices.
Shipping & Returns
- FREE SHIPPING is on all orders over $499* and up to 25kg within Metro areas only including Melbourne, Sydney, Brisbane, Adelaide.
- Free Shipping excludes certain heavy and bulky items over $499.
- Remote areas might incur additional charges, in these cases we will contact you.
- Please note that heavy and bulky items ( some seats, large anchors, consoles, rope, chain etc ) have shipping limitations and can't be sent to any islands ( 2899 - Norfolk Island, 4875 - Thursday Island, 6798 - Christmas Island, 6799 - Cocos island ) or remote areas such as NT, WA, TAS, regional or far Nth QLD. In these cases we will contact you regarding the order and either cancel it or send to an alternative address if possible.
- *Note: Please note that certain heavy and bulky items over $499 might not be available for Free Shipping. In these cases we will contact you to confirm before the order is shipped out. Additional freight charges might apply. ie
- Drums and long lengths of chain
- Dangerous goods
- Large bales of rope
- Palletised anchors
- Large or palletised seats
- Leaning posts
- T-Tops
- Aerials and Outriggers
- Bulk PFD’S
- Rigid lifebuoys and holders
- Unfortunately we are unable to ship Large or Bulky items to PO Boxes.
- Unfortunately we are unable to offer pickups
- At the moment we are unable to ship any items Internationally
- Delivery times may vary, especially during peak periods. While we strive to have orders despatched within 2-5 working days, some items can take a little longer due to interstate warehouse locations and delivery times. If an item is needed for a specific date, please check with us first. To be on the safe side it is best to order at least 10 working days before an item is needed.
- Buyers living in remote areas such as farms, islands, mining camps, small towns, or out-of-towners, etc may need to collect from their nearest freight depot as we can't guarantee door to door delivery in each case.
- If an order can't be delivered by the courier due to an address issue and is returned to us, we will require an additional payment for reshipping the item(s)
- All deliveries are made during weekdays only, during normal business hours (9am to 5pm). Orders can't be delivered on weekends, public holidays or after business hours.
- We use Direct Freight Express, StarTrack Express, Toll, Couriers Please and Australia Post for shipping items, depending on your location and the item being shipped, at our discretion.
- NOTE: All Australian Courier charges allow for Only 1 Attempted Delivery per order. All orders will be shipped as ATL (Authority to Leave) at the premises. Please supply an address where someone can sign for the parcel.
- Depending on order time, most orders leave our warehouses within 2-5 working days of receiving the order. We do ask that you allow 7-10 working days for delivery, however in most cases orders are delivered within Metro Areas within 2-5 working days. Regional areas can take longer.
- If there is a stock availability issue on certain products in your order, you will be contacted and alerted to the status of your purchase. For more information on products and delivery, please contact us.
- All orders are traceable and are sent with either Direct Freight Express, Australia Post, Couriers Please, Startrack Express or Toll Express.
- *Note: Some products may take longer to despatch, as they are custom order in items and are warehoused interstate with our suppliers.
- Time frames for delivery may alter due to circumstances beyond our control, such as, but not limited to, supplier stock levels.
Bulky Item
- *Note: Please note that certain heavy and bulky items over $499 might not be available for Free Shipping. In these cases we will contact you to confirm before the order is shipped out. Additional freight charges might apply. ie
- Drums and long lengths of chain
- Dangerous goods
- Large bales of rope
- Palletised anchors
- Large or palletised seats
- Leaning posts
- T-Tops
- Aerials and Outriggers
- Bulk PFD’S
- Rigid lifebuoys and holders
- Please note that heavy and bulky items ( some seats, large anchors, consoles, rope, chain etc ) have shipping limitations and can't be sent to any islands ( 2899 - Norfolk Island, 4875 - Thursday Island, 6798 - Christmas Island, 6799 - Cocos island ) or remote areas such as NT, WA, TAS, regional or far Nth QLD. In these cases we will contact you regarding the order and either cancel it or send to an alternative address if possible.
- Unfortunately we are unable to ship Large or Bulky items to PO Boxes.
- Please refer to our Shipping page for more details.
Copyright © Marine Depot 2024
ABN: 99 423 721 756
Shop Now. Pay Later.
Always interest-free.
Add your favourites to cart
Select Afterpay at checkout
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit https://www.afterpay.com/terms