Stripspeed Kit 5L
FEATURES: Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30* minutes or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn't cause mechanical wear through multiple refits, and doesn't create toxic dusts or debris, increasing the lifetime of the metal. Save time and money on Propspeed applications with Stripspeed! *Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F) EASY TO USE - Easy to apply, easy to remove. Scrape and then scrub with an abrasive pad. STRIPS SWIFTLY - Stripspeed works within 30 minutes or less, speeding up the Propspeed removal process. APPLY AT ANY ANGLE - Stripspeed's unique formula can be applied at any angle with sliding off. NO AIRBORNE PARTICLES - With no grinding required, there will be no airborne particles, making Propspeed removal harmless. HOW MUCH DO I NEED? 1 x Propspeed Large Kit = 2L/0.52 gal Stripspeed 1 x Propspeed Medium Kit = 1L/0.26 gal Stripseed 1 x Propspeed Small Kit = 0.5L/0.13 gal Stripspeed SUITABLE FOR USE ON: All metal surfaces where Propspeed, or similar running gear coatings, have been applied. DO NOT USE ON: • Transducers • Underwater lights • Hull • Foulfree • Lightspeed • Powder coat Part No.322078Size 5LtrCoverage 5L / 1.32 gal = 10m² / 107.6ft²Unit Qty 1Note *******Arriving Mid December 2022.*******